for Snow Plow Machine Use Cemented Carbide Snow Plow Insert

We adhere to explore the value of our Tungsten Carbide Tips(buttons) For Mining, Tungsten Carbide Internal Plumblossom Teath Wrench Nozzle, Cemented Carbide Rotating Seal Ring, but also adhere to explore the brand value, to maximize the value of resource integration. Through continuous improvement, our company has consolidated its position as an industry leader in terms of quality. We insist on the combination of independent innovation and open cooperation, and our independent research and development capability has been greatly improved. The law is the bottom line of morality, and the rule of law is the principle of our company. It is our eternal goal to tap demand, integrate resources, continue to innovate, and create the greatest value for customers.

Application:

Carbide snow plow blades are used on the front, underbody, and wing of a snow plow. Carbide snow plow blades look very similar to traditional steel cutting edges; however, they have a carbide insert brazed into the thickness of the steel or overlayed on the face along the bottom of the blade. Carbide is short for Tungsten Carbide; a metal composed of equal parts tungsten and carbon. Carbide is denser than steel enabling it to be a versatile and durable edge material that provides much better wear resistance properties than a cutting edge made of just steel.

Body blade:
1.The blade shall be flat hot -rolled finished steel to meet or exceed specification for A36 or 1020 type steel;

2. Punching shall be 11/16”(or customized) square holes with countersink to receive 5/8”diameter plow bolts.Location and space will be done according to customer’s drawings.

3. The slot for the carbide inserts shall be milled in the center of the blade edge.

Tungsten carbide inserts

1.physical property:The inserts shall be a high shock WC of tungsten carbide with cobalt at least 11%.

Density(g/cm³):14.1-14.6

Hardness(HRA):87.5-89

Transverse Rupture strength(N/mm²):3200 min

Porosity:A06B02C00

2. insert dimension:

Height: .635”+/-.0054(long side)

Width: .365”+/-.010

Length: 1” Nominal

Bottom Angle:25 degrees with a nose radius of 1/16: minimum

Brazing

1. The brazing material shall be a high strength brass.

2. The tungsten carbide inserts shall be positioned in the milled slot at approximately .010 between the inserts the entire length of each cutting edge section

Quality Control
1.All raw materials are tested in terms of density, hardness and TRS before use
2.Every piece of product goes through in-process and final inspection
3.Every batch of product can be traced

Certificates & Quality Control

Packing & Shipment

Why choose us?

1.Over many years' history in cemented carbide products research and develop.

2.Up to date production facilities;
3.Complete & strictly QC system throughout the manufacturing process.
4.Lead time as fast as 12-20 days!

Our company response to the international trend, relying on our elite dedicated to international customers to provide quality for Snow Plow Machine Use Cemented Carbide Snow Plow Insert. Since the establishment of the company, we have always regarded integrity as the cornerstone of corporate governance. Our company takes 'highlighting specialization, optimizing regionalization, realizing differentiation' as the development idea, implements rational management and continues to maintain a rapid development speed.