Gw Carbide-Tungsten Carbide Snowplow Pins Snowplow Bits Snowplow Blades Asphalt Bit

Through years of practical exploration, a R&D system with a technology center as the main body has been gradually established, and a R&D team has gathered a large number of first-class technical personnel in the field of Cemented Carbide Stationary Seal Ring, Tungsten Carbide Seal Rings, tungsten carbide convex stage sleeve with keyway at home and abroad. Serve the company's R&D, sales, and after-sales lines, and provide customers with solutions. We strive to provide good products and high-quality services to the majority of new and old customers, customer satisfaction is our goal. We always emphasize the principle of action, which is the core force for the enterprise to become stronger and bigger. Our company strictly abides by the honest and trustworthy, dedicated professional work attitude, for the majority of businesses and individuals.

Application:

Carbide snow plow blades are used on the front, underbody, and wing of a snow plow. Carbide snow plow blades look very similar to traditional steel cutting edges; however, they have a carbide insert brazed into the thickness of the steel or overlayed on the face along the bottom of the blade. Carbide is short for Tungsten Carbide; a metal composed of equal parts tungsten and carbon. Carbide is denser than steel enabling it to be a versatile and durable edge material that provides much better wear resistance properties than a cutting edge made of just steel.

Body blade:
1.The blade shall be flat hot -rolled finished steel to meet or exceed specification for A36 or 1020 type steel;

2. Punching shall be 11/16”(or customized) square holes with countersink to receive 5/8”diameter plow bolts.Location and space will be done according to customer’s drawings.

3. The slot for the carbide inserts shall be milled in the center of the blade edge.

Tungsten carbide inserts

1.physical property:The inserts shall be a high shock WC of tungsten carbide with cobalt at least 11%.

Density(g/cm³):14.1-14.6

Hardness(HRA):87.5-89

Transverse Rupture strength(N/mm²):3200 min

Porosity:A06B02C00

2. insert dimension:

Height: .635”+/-.0054(long side)

Width: .365”+/-.010

Length: 1” Nominal

Bottom Angle:25 degrees with a nose radius of 1/16: minimum

Brazing

1. The brazing material shall be a high strength brass.

2. The tungsten carbide inserts shall be positioned in the milled slot at approximately .010 between the inserts the entire length of each cutting edge section

Quality Control
1.All raw materials are tested in terms of density, hardness and TRS before use
2.Every piece of product goes through in-process and final inspection
3.Every batch of product can be traced

Certificates & Quality Control

Packing & Shipment

Why choose us?

1.Over many years' history in cemented carbide products research and develop.

2.Up to date production facilities;
3.Complete & strictly QC system throughout the manufacturing process.
4.Lead time as fast as 12-20 days!

Our goal is to make our brand recognized, promoting the development of Gw Carbide-Tungsten Carbide Snowplow Pins Snowplow Bits Snowplow Blades Asphalt Bit towards an intelligent, high-efficient, energy-saving and environmental-friendly trend. We have the ability to fully meet customers' quality requirements and achieve high-quality cost performance. Our company can provide customers with a full range of technical support and services.