Snow Plow Blade Sale Well in Russia.

Whether our Tungsten Carbide Straight Sleeve With Spiral Groove, Tungsten Carbide Inserts, Tungsten Carbide Seal Rings is designed as standard or customized, it is known worldwide for high performance, reliability and innovation. We warmly welcome customers from home and abroad to visit our company, and to cooperate with us for a splendid future together. By carrying forward our fine tradition and brand advantages, we are striving to move forward with our historical mission of creating greater value. Our company has advanced production equipment and rich production experience. Our company adheres to the implementation of process standard cost management to improve the level of enterprise management.

Application:

Carbide snow plow blades are used on the front, underbody, and wing of a snow plow. Carbide snow plow blades look very similar to traditional steel cutting edges; however, they have a carbide insert brazed into the thickness of the steel or overlayed on the face along the bottom of the blade. Carbide is short for Tungsten Carbide; a metal composed of equal parts tungsten and carbon. Carbide is denser than steel enabling it to be a versatile and durable edge material that provides much better wear resistance properties than a cutting edge made of just steel.

Body blade:
1.The blade shall be flat hot -rolled finished steel to meet or exceed specification for A36 or 1020 type steel;

2. Punching shall be 11/16”(or customized) square holes with countersink to receive 5/8”diameter plow bolts.Location and space will be done according to customer’s drawings.

3. The slot for the carbide inserts shall be milled in the center of the blade edge.

Tungsten carbide inserts

1.physical property:The inserts shall be a high shock WC of tungsten carbide with cobalt at least 11%.

Density(g/cm³):14.1-14.6

Hardness(HRA):87.5-89

Transverse Rupture strength(N/mm²):3200 min

Porosity:A06B02C00

2. insert dimension:

Height: .635”+/-.0054(long side)

Width: .365”+/-.010

Length: 1” Nominal

Bottom Angle:25 degrees with a nose radius of 1/16: minimum

Brazing

1. The brazing material shall be a high strength brass.

2. The tungsten carbide inserts shall be positioned in the milled slot at approximately .010 between the inserts the entire length of each cutting edge section

Quality Control
1.All raw materials are tested in terms of density, hardness and TRS before use
2.Every piece of product goes through in-process and final inspection
3.Every batch of product can be traced

Certificates & Quality Control

Packing & Shipment

Why choose us?

1.Over many years' history in cemented carbide products research and develop.

2.Up to date production facilities;
3.Complete & strictly QC system throughout the manufacturing process.
4.Lead time as fast as 12-20 days!

We continue to provide Snow Plow Blade Sale Well in Russia. and solutions with independent intellectual property rights for all walks of life. We are committed to achieve the overall goal of optimizing corporate resources and enhancing corporate competitiveness by combining computer technology, information technology and management ideas. It is the goal of our talent strategy to help the marine industry realize the value of life to the maximum extent.