Snow Pusher/ Snow Plow/ Snow Blade for Farm Tractors

Through our unremitting efforts, we have produced Tungsten Carbide Snow Plow Blades, Tungsten Carbide Cutting Inserts, Carbide Indexable Insert with higher and higher technological content, and some of our production technologies are in the leading position. We have established a set of perfect quality management guarantee system and strong marketing network. Our products meet the relevant technical standards, and customer satisfaction has always been our pursuit. In the market, the competitive characteristics that an enterprise must possess for survival or becoming a competitor.

Application:

Carbide snow plow blades are used on the front, underbody, and wing of a snow plow. Carbide snow plow blades look very similar to traditional steel cutting edges; however, they have a carbide insert brazed into the thickness of the steel or overlayed on the face along the bottom of the blade. Carbide is short for Tungsten Carbide; a metal composed of equal parts tungsten and carbon. Carbide is denser than steel enabling it to be a versatile and durable edge material that provides much better wear resistance properties than a cutting edge made of just steel.

Body blade:
1.The blade shall be flat hot -rolled finished steel to meet or exceed specification for A36 or 1020 type steel;

2. Punching shall be 11/16”(or customized) square holes with countersink to receive 5/8”diameter plow bolts.Location and space will be done according to customer’s drawings.

3. The slot for the carbide inserts shall be milled in the center of the blade edge.

Tungsten carbide inserts

1.physical property:The inserts shall be a high shock WC of tungsten carbide with cobalt at least 11%.

Density(g/cm³):14.1-14.6

Hardness(HRA):87.5-89

Transverse Rupture strength(N/mm²):3200 min

Porosity:A06B02C00

2. insert dimension:

Height: .635”+/-.0054(long side)

Width: .365”+/-.010

Length: 1” Nominal

Bottom Angle:25 degrees with a nose radius of 1/16: minimum

Brazing

1. The brazing material shall be a high strength brass.

2. The tungsten carbide inserts shall be positioned in the milled slot at approximately .010 between the inserts the entire length of each cutting edge section

Quality Control
1.All raw materials are tested in terms of density, hardness and TRS before use
2.Every piece of product goes through in-process and final inspection
3.Every batch of product can be traced

Certificates & Quality Control

Packing & Shipment

Why choose us?

1.Over many years' history in cemented carbide products research and develop.

2.Up to date production facilities;
3.Complete & strictly QC system throughout the manufacturing process.
4.Lead time as fast as 12-20 days!

We always pay attention to the problems of using our Snow Pusher/ Snow Plow/ Snow Blade for Farm Tractors and improve its quality accordingly in time. We provide growth opportunities for our employees so that they can see the future and be passionate about it. The spirit of enterprise shows our company's pursuit of path and state in the development process.