Snow Remove Blade Use Tungsten Carbide Snow Plow Insert

Our company constantly strengthen our internal strength, work hand in hand with all walks of life, strive to create excellent Tungsten Carbide Non-standard Axle Sleeve, Cemented Carbide Bushing 400 Series Stationary, Tungsten Carbide Sleeve For ESP for our customers while constantly expanding market share. We hope that through learning and propaganda, the corporate culture will become the staff and behavior norms and the endogenous driving force for the development of the enterprise. We vigorously develop new products and strive to explore new markets, which provide a broad space for the development of the enterprise.

Application:

Carbide snow plow blades are used on the front, underbody, and wing of a snow plow. Carbide snow plow blades look very similar to traditional steel cutting edges; however, they have a carbide insert brazed into the thickness of the steel or overlayed on the face along the bottom of the blade. Carbide is short for Tungsten Carbide; a metal composed of equal parts tungsten and carbon. Carbide is denser than steel enabling it to be a versatile and durable edge material that provides much better wear resistance properties than a cutting edge made of just steel.

Body blade:
1.The blade shall be flat hot -rolled finished steel to meet or exceed specification for A36 or 1020 type steel;

2. Punching shall be 11/16”(or customized) square holes with countersink to receive 5/8”diameter plow bolts.Location and space will be done according to customer’s drawings.

3. The slot for the carbide inserts shall be milled in the center of the blade edge.

Tungsten carbide inserts

1.physical property:The inserts shall be a high shock WC of tungsten carbide with cobalt at least 11%.

Density(g/cm³):14.1-14.6

Hardness(HRA):87.5-89

Transverse Rupture strength(N/mm²):3200 min

Porosity:A06B02C00

2. insert dimension:

Height: .635”+/-.0054(long side)

Width: .365”+/-.010

Length: 1” Nominal

Bottom Angle:25 degrees with a nose radius of 1/16: minimum

Brazing

1. The brazing material shall be a high strength brass.

2. The tungsten carbide inserts shall be positioned in the milled slot at approximately .010 between the inserts the entire length of each cutting edge section

Quality Control
1.All raw materials are tested in terms of density, hardness and TRS before use
2.Every piece of product goes through in-process and final inspection
3.Every batch of product can be traced

Certificates & Quality Control

Packing & Shipment

Why choose us?

1.Over many years' history in cemented carbide products research and develop.

2.Up to date production facilities;
3.Complete & strictly QC system throughout the manufacturing process.
4.Lead time as fast as 12-20 days!

We've been fully committed to offering our consumers with competitively priced good quality merchandise, prompt delivery and professional support for Snow Remove Blade Use Tungsten Carbide Snow Plow Insert. Customer satisfaction is our driving force, we will continue to provide customers with quality products and services. We have established a set of quality assurance system, after several years of efforts, has achieved a solid position in the market, successfully meet the different needs of domestic and foreign users.